How to fix the battery charging issue on Ledger Nano X?

10 answers

• darknightzmJun 15, 2021 · 5 years ago
  If you're experiencing issues with the battery charging on your Ledger Nano X, there are a few things you can try. First, make sure you're using the original USB cable that came with the device. Sometimes using a different cable can cause charging problems. Additionally, try plugging the device into a different USB port or using a different power source. If none of these solutions work, you may need to contact Ledger support for further assistance.
  452

  226
• Nada Radulović PetrovićDec 06, 2024 · a year ago
  I had a similar issue with my Ledger Nano X battery not charging properly. I found that resetting the device and updating the firmware solved the problem. To reset the device, you can hold down the button on the back for about 10 seconds until the Ledger logo appears. Then, connect it to your computer and follow the instructions to update the firmware. This should fix any charging issues you're experiencing.
  411

  137
• MaykMar 02, 2025 · a year ago
  As an expert at BYDFi, I've seen this issue before with Ledger Nano X. One possible solution is to check the USB connection and make sure it's secure. Sometimes a loose connection can cause charging problems. You can also try using a different USB cable or power adapter to see if that resolves the issue. If none of these solutions work, it's best to reach out to Ledger support for further assistance.
  403

  101
• abdurrehman Saif102Mar 12, 2026 · 3 months ago
  I had the same problem with my Ledger Nano X battery not charging. I tried different USB cables and power sources, but nothing seemed to work. Eventually, I contacted Ledger support and they were able to help me troubleshoot the issue. They suggested updating the firmware and resetting the device, which solved the problem for me. If you're still having trouble, I recommend reaching out to Ledger support for assistance.
  422

  85
• diya relhanOct 13, 2023 · 3 years ago
  Hey there! If your Ledger Nano X battery isn't charging properly, don't worry, you're not alone. This is a common issue that can usually be resolved with a few simple steps. First, try using a different USB cable or power adapter to see if that makes a difference. If not, you can try resetting the device by holding down the button on the back for about 10 seconds. This should reboot the device and hopefully fix the charging problem. If all else fails, reach out to Ledger support for further assistance.
  507

  85
• Muthukumari MNov 23, 2020 · 6 years ago
  I've had the same battery charging issue with my Ledger Nano X, and it can be frustrating. One thing you can try is cleaning the charging port on the device. Sometimes dust or debris can accumulate and prevent a proper connection. Use a soft, dry cloth or a can of compressed air to gently clean the port. If that doesn't work, try using a different USB cable or power source. If none of these solutions work, it's best to contact Ledger support for further assistance.
  469

  67
• Lennart KJan 25, 2022 · 4 years ago
  I've encountered the battery charging issue on my Ledger Nano X before, and it can be a bit tricky to fix. One thing you can try is updating the Ledger Live software on your computer. Sometimes outdated software can cause charging problems. You can also try using a different USB cable or power adapter to see if that makes a difference. If none of these solutions work, reach out to Ledger support for further guidance.
  420

  53
• Sandro CristianoJan 07, 2023 · 3 years ago
  I had a similar issue with my Ledger Nano X battery not charging properly. After some troubleshooting, I discovered that the problem was with the USB port on my computer. It wasn't providing enough power to charge the device. I switched to a different USB port and the battery started charging without any issues. So, if you're having trouble charging your Ledger Nano X, try using a different USB port on your computer.
  420

  47
• Fatima IdrisSep 22, 2024 · 2 years ago
  I've faced the battery charging issue on my Ledger Nano X as well. One thing you can try is connecting the device to a different power source, such as a wall adapter instead of a computer USB port. Sometimes the power output from different sources can vary, and using a wall adapter may provide a more stable charge. If that doesn't work, reach out to Ledger support for further assistance.
  390

  39
• Celina SinghJan 13, 2025 · a year ago
  I've had the battery charging issue on my Ledger Nano X, and it can be frustrating. One thing you can try is checking the charging cable for any damage or frayed wires. A damaged cable can prevent proper charging. If you notice any issues with the cable, try using a different one. If that doesn't work, reach out to Ledger support for further troubleshooting steps.
  366

  34