What are the recommended overclock settings for a 860m graphics card when mining cryptocurrencies?

12 answers

• Mauro CipollettiOct 14, 2023 · 2 years ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to find the right balance between performance and stability. Start by increasing the core clock speed by small increments, such as 10 MHz, and test the stability of your system. If everything is running smoothly, you can continue increasing the core clock speed until you reach the maximum stable value. Then, repeat the same process for the memory clock speed. Keep in mind that every graphics card is different, so the optimal overclock settings may vary. It's recommended to monitor the temperature of your graphics card while mining and make sure it stays within safe limits.
  674

  337
• Rider ZyanMay 04, 2025 · 3 months ago
  Overclocking a 860m graphics card for mining cryptocurrencies can be a bit tricky, as it's a mobile graphics card and may have limited cooling capabilities. However, you can still try to increase the core clock speed and memory clock speed gradually. Start by increasing the core clock speed by 5-10% and test the stability of your system. If everything is working fine, you can continue increasing the core clock speed until you notice any instability. Then, do the same for the memory clock speed. Keep in mind that overclocking can void your warranty and may cause damage to your graphics card if not done properly. So, proceed with caution and make sure to monitor the temperature of your graphics card.
  707

  236
• Haagensen HagenMay 05, 2023 · 2 years ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to consider the specific requirements of the mining software you are using. Different mining algorithms may have different optimal settings. As for the core clock speed and memory clock speed, you can start by increasing them gradually and monitoring the performance and stability of your system. It's recommended to use software tools like MSI Afterburner or EVGA Precision X to adjust the overclock settings. Remember to keep an eye on the temperature of your graphics card and make sure it doesn't exceed safe limits. If you're unsure about the optimal overclock settings, you can also consult the community forums or seek advice from experienced miners.
  752

  188
• avula shivaprasadJul 20, 2023 · 2 years ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to be cautious and not push the card too hard. Start by increasing the core clock speed by small increments, such as 5-10 MHz, and test the stability of your system. If everything is running smoothly, you can continue increasing the core clock speed until you notice any instability. Then, do the same for the memory clock speed. Keep in mind that overclocking can increase the power consumption and heat generation of your graphics card, so make sure your cooling solution is adequate. It's also recommended to use mining software that allows you to adjust the power limit of your graphics card to prevent it from drawing too much power.
  733

  147
• Mauro CipollettiMay 21, 2024 · a year ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to find the right balance between performance and stability. Start by increasing the core clock speed by small increments, such as 10 MHz, and test the stability of your system. If everything is running smoothly, you can continue increasing the core clock speed until you reach the maximum stable value. Then, repeat the same process for the memory clock speed. Keep in mind that every graphics card is different, so the optimal overclock settings may vary. It's recommended to monitor the temperature of your graphics card while mining and make sure it stays within safe limits.
  674

  113
• Rider ZyanFeb 16, 2024 · 2 years ago
  Overclocking a 860m graphics card for mining cryptocurrencies can be a bit tricky, as it's a mobile graphics card and may have limited cooling capabilities. However, you can still try to increase the core clock speed and memory clock speed gradually. Start by increasing the core clock speed by 5-10% and test the stability of your system. If everything is working fine, you can continue increasing the core clock speed until you notice any instability. Then, do the same for the memory clock speed. Keep in mind that overclocking can void your warranty and may cause damage to your graphics card if not done properly. So, proceed with caution and make sure to monitor the temperature of your graphics card.
  707

  101
• Haagensen HagenApr 13, 2022 · 3 years ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to consider the specific requirements of the mining software you are using. Different mining algorithms may have different optimal settings. As for the core clock speed and memory clock speed, you can start by increasing them gradually and monitoring the performance and stability of your system. It's recommended to use software tools like MSI Afterburner or EVGA Precision X to adjust the overclock settings. Remember to keep an eye on the temperature of your graphics card and make sure it doesn't exceed safe limits. If you're unsure about the optimal overclock settings, you can also consult the community forums or seek advice from experienced miners.
  752

  94
• avula shivaprasadOct 10, 2022 · 3 years ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to be cautious and not push the card too hard. Start by increasing the core clock speed by small increments, such as 5-10 MHz, and test the stability of your system. If everything is running smoothly, you can continue increasing the core clock speed until you notice any instability. Then, do the same for the memory clock speed. Keep in mind that overclocking can increase the power consumption and heat generation of your graphics card, so make sure your cooling solution is adequate. It's also recommended to use mining software that allows you to adjust the power limit of your graphics card to prevent it from drawing too much power.
  733

  82
• Mauro CipollettiJun 08, 2022 · 3 years ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to find the right balance between performance and stability. Start by increasing the core clock speed by small increments, such as 10 MHz, and test the stability of your system. If everything is running smoothly, you can continue increasing the core clock speed until you reach the maximum stable value. Then, repeat the same process for the memory clock speed. Keep in mind that every graphics card is different, so the optimal overclock settings may vary. It's recommended to monitor the temperature of your graphics card while mining and make sure it stays within safe limits.
  674

  68
• Rider ZyanNov 28, 2024 · 9 months ago
  Overclocking a 860m graphics card for mining cryptocurrencies can be a bit tricky, as it's a mobile graphics card and may have limited cooling capabilities. However, you can still try to increase the core clock speed and memory clock speed gradually. Start by increasing the core clock speed by 5-10% and test the stability of your system. If everything is working fine, you can continue increasing the core clock speed until you notice any instability. Then, do the same for the memory clock speed. Keep in mind that overclocking can void your warranty and may cause damage to your graphics card if not done properly. So, proceed with caution and make sure to monitor the temperature of your graphics card.
  707

  65
• Haagensen HagenNov 15, 2024 · 9 months ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to consider the specific requirements of the mining software you are using. Different mining algorithms may have different optimal settings. As for the core clock speed and memory clock speed, you can start by increasing them gradually and monitoring the performance and stability of your system. It's recommended to use software tools like MSI Afterburner or EVGA Precision X to adjust the overclock settings. Remember to keep an eye on the temperature of your graphics card and make sure it doesn't exceed safe limits. If you're unsure about the optimal overclock settings, you can also consult the community forums or seek advice from experienced miners.
  752

  63
• avula shivaprasadFeb 28, 2024 · a year ago
  When it comes to overclocking a 860m graphics card for mining cryptocurrencies, it's important to be cautious and not push the card too hard. Start by increasing the core clock speed by small increments, such as 5-10 MHz, and test the stability of your system. If everything is running smoothly, you can continue increasing the core clock speed until you notice any instability. Then, do the same for the memory clock speed. Keep in mind that overclocking can increase the power consumption and heat generation of your graphics card, so make sure your cooling solution is adequate. It's also recommended to use mining software that allows you to adjust the power limit of your graphics card to prevent it from drawing too much power.
  733

  57