What are the steps to disable UEFI mode in BIOS when setting up a cryptocurrency mining rig?

2 answers

• Moss MoesgaardJan 23, 2022 · 4 years ago
  No worries, I got you covered! Here's a step-by-step guide to disable UEFI mode in BIOS for your cryptocurrency mining rig setup: 1. Power off your computer and turn it back on. 2. As soon as the computer starts, repeatedly press the BIOS access key (usually Del, F2, or F10) to enter the BIOS setup. 3. Once inside the BIOS setup, navigate to the 'Boot' or 'UEFI' section. 4. Look for an option called 'UEFI Boot' or 'Secure Boot' and disable it. 5. Save the changes and exit the BIOS setup. 6. Restart your computer and it should now boot in Legacy BIOS mode. Remember, every BIOS is different, so the exact steps may vary. Make sure to consult your motherboard's manual or the manufacturer's website for specific instructions tailored to your hardware.
  762

  381
• student e09cd5deJan 26, 2021 · 5 years ago
  Disabling UEFI mode in BIOS for setting up a cryptocurrency mining rig can be done by following these steps: 1. Start by shutting down your computer completely. 2. Turn on your computer and repeatedly press the BIOS access key (usually Del, F2, or F10) to enter the BIOS setup. 3. Once in the BIOS setup, navigate to the 'Boot' or 'UEFI' section. 4. Look for an option related to UEFI or Secure Boot and disable it. 5. Save the changes and exit the BIOS setup. 6. Restart your computer and it should now be running in Legacy BIOS mode. Please note that the exact steps may vary depending on your motherboard and BIOS version. Refer to your motherboard's manual or the manufacturer's website for specific instructions tailored to your hardware.
  750

  250